Polishing Materials

Made from non woven nylon material impregnated with Aluminium oxide or Silicon Carbide Abrasive Grain

Grade :
Coarse, Medium, Fine Very Fine & Ultra Fine
• Rust & Corrosion removal
• Cleaning & Finishing of Die & Mould
• Edge Braking & Hand deburring of metal, Plastic & Wood

Make: 3M, Norton and Scrubex

Size:

150mm diameter(⌀) x 1 ply, 2 ply, 3 ply & 4 ply

Application:

Matt Buff which are best for any uneven surfaces and eliminates the abrasive cut.

Make: Scrubex

Non Woven nylon material with Aluminium oxide or silicon carbide arranged in form of brush as well as alternate layer of abrasive coated cloth roll.

Grit:
36 – 60 – 80 – 120 – 220-320-400

Application :
• Finishing of fabrication work
• General decorative finish on any metallic surface or wooden  article
• Light deburring

Make: Scrubex

This wheel / disc are suitable for light deburring or for satin / matt / hairline finish for brass ware, watch strips, dairy equipment, stainless steel utensil, cutlery etc.
Density :
000 – 00 – 0 – 1 – 3 – 5 – 8

Size:
25mm- 350mm diameter (⌀) 

Application :
• Matt / Satin finish on stainless steel, brassware, or aluminium article
• Deburring, mould and die polishing
• Dent removal on brass, SS and auto components

Make: Scrubex, Pimco

 

Flap Disc are created by overlapping coated Abrasive flap and adhering them to back up disc

Grit:
36 – 60 – 80 – 120 – 220

Application :
• Recommended for high stock removal on stainless steel, carbon steel, aluminium and most alloys

Make: Scrubex, Yuri, Xtrapower

This wheel are manufacture out of superior abrasive material resin bonded with cloth backing and available in grit 36 to 400

Grit:

36 – 60 – 80 – 120 – 220 – 320 – 400 – 600 – 800 – 1000 – 1200

Size :
75mm – 350mm diameter (⌀)

Application :
• Preparation fo stainless steel surface
• Cleaning of weld surface
• Burr removal on fabricated surface or threaded metal

Make: Scrubex, Norton, Cumi, Maharaja

This wheel are manufacture out of superior abrasive material resin bonded with cloth backing and available in grit 36 to 400

Grit:

36 – 60 – 80 – 120 – 220 

Size :
25mm – 100mm

Application :
• Preparation fo stainless steel surface
• Cleaning of weld surface
• Burr removal on fabricated surface or threaded metal

Make: Scrubex

Made from long staple unbleached calico specifically treated to give more life to buff.

Best suited for polished brass ware, nickle silver, copper, aluminium & stainless steel. “B” & “B-1” both quality are popular for general rough buffing work.

Size:
“B” : 60 Folds = 1”
“B-1” : 70 Folds = 1”

Make: Shinetex

Made from non woven abrasive material impregnated with aluminium oxide or silicon carbide abrasive

Size :
OD : 250mm– 300mm– 350mm– 400mm
ID : 75mm – 125mm – 150mm – 180mm

Application :
• Produce lustrous satin finish on any type of metal ferrous and non ferrous

Make: Shinetex

Made from full piece and are available in “B” & “H” quality. 

Size:

1/2” thick section (upto 2.1/2” thick available with washer)

Center bore as per specification for 1/2″ thick section.

Application:

Extensively used for emery brushing & polishing steel casting, stainless steel, cycle and motor components.

Make: Shinetex

Made from selected variety of sisal cloth with alternate level of sisal ply and equal thick layer of cloth ply and sewed tightly with best quality thread.

Size:

Available in 1/2″ thick Section (upto 2.1/2″ thick with washer)

Center hore as per requirement for 1/2″ thick Section.

Application:

Used for cutting down operation & removal of marks of previous grinding operation of steel and Stainless Steel product.

Make: Shinetex

This buff made by using highest quality cotton sheeting and held by evenly & closely distributed teeth of steel ring center.

Size:

Custom made as per requirement

Application:

Polishing of  final finish surface

Make: Shinetex

These buff are manufactured from best carded yarn cloth considering requirement of Jewellery Industry. These circular stitch buff are according to Industry standard and ideal for Jewellery buffing and it is also suitable for Non-Metallic Article.

Available with leather washer or chemical hardened center for using on tapper spindle buffing machine.

There are five different variety has been developed considering specific requirement of party to party.

 

Convolute wheel made from non woven abrasive material which wind on a core suitable for plain surface with powerful grinding ability and uniform finish

Size:

100mm- 350mm diameter(⌀)

Application :
• Deburring of auto and electrical components
• Polishing of SS and aerospace components like turbine blade
• Light duty deburring

Make: Scrubex

Size:

100mm- 350mm diameter(⌀)

Application:

Steel pol mops is mainly used on bench type conical spindle polishing machines which are used for primary operation of the metal surface preparation and for heavy buffing use. This mops are light in weight and durable. 

Make: Shinetex, Gadhia

White buff mop is made up of cotton materials to polish or buff this secondary operations of cleaning. 

Size: 

25mm – 350mm diameter(⌀)

Application:

• To get a smooth finish of final stages of cleaning. 
• Mirror polishing of steels, aluminium and others metals.

 

Sizes:

50mm-N0. 15, 75mm-N0. 25, 100mm- No. 35, 125mm- No. 45

Application:

Brass wire wheels are used for ultrafine polishing of stainless steel and nonferrous metals. Specially for temple carvings, gift articles and precious metals items.

Sizes:

100mm & 150mm diameter(⌀)

Application:

Hard steel wire wheels are used for polishing of very high hard surface and remove roughness at extreme level.

Sizes:

25mm- 350mm in diameter (⌀) and 25mm to 100mm width.

Application:

Fiber brush wheel are used for surface finishing of stainless steel. Major applications are utensils, kitchen equipments and household products. 

Make: Taj, Kohinoor, Deepak

Sizes:

50mm- 350mm diameter (⌀) and 25mm- 100mm width

Application:

Cloth buff wheel is used for final polishing of ferrous as well as non ferrous articles with green, white or pink polishing bars to achieve smooth surfaces.

Buffing bar is a greasy materials made of wax. It is used during the buffing stages to remove dirt, scratches and other particles from the surface.

Available colours:

Red, Yellow, Green, Pink, Black, White

Application: 

• To provide protection to burning of surface of metals.
• Removes dirt, scratches and other particles from surface to make them mirror polish.